Product Overview
These urethane performance bushings replace the stock inner rubber upper control arm bushings on the rear of your Honda. With the stock rubber bushings, the rear upper control arm has a lot of flex and deflection, which makes the car feel unstable and lacking precision, especially during hard cornering. These urethane bushings are stiffer than stock rubber and will not deflect as much. This helps keep the alignment in check with less variation. A limited lifetime warranty means you'll likely never have to pay for another bushing ever again!
Sold as a pair for the rear upper control arm INNER location.
Unlike other urethane bushings using only one or two urethane grades, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each component while minimizing unwanted NVH. Bushings are typically produced in one of three grades – Yellow (70-80A, approximately 25% stiffer than stock), Purple (80-90A, approximately 30% stiffer than stock), and Black (90-95A, approximately 80% stiffer than stock).