Product Overview

By launching the new KW Variant 5 coilover suspension, KW focuses on its successful motorsport suspension technology -ith KW Solid Piston technology -nd modular design with damper valves connected in series. The KW Variant 5 assures precise and fast damping without delay in sports cars and super sports cars. The shock absorbers and valves react directly, even with small spring travel, minimal steering movements, and minor road undulations. Every driving maneuver and every input, such as those generated during braking, acceleration, steering, load changes, and undulations, are damped much more precisely. The KW Solid Piston dampers provide much more platform support to the chassis than conventional dampers and thus, depending on the vehicle body allow for lower spring rates to be used. The KW Variant 5 with adjustable KW SPCLH-A (KW Solid Piston Compression Low- and Highspeed Adjustable) compression damping and the KW SPRLH-A (KW Solid Piston Rebound Low- and Highspeed Adjustable) rebound damping offers significant added values: more sensitive damping, cavitation-free function, precise high-frequency damping, low-pressure gas range from 6 to 10 bar and low hysteresis. The low- and high-speed valve units in the KW Variant 5 coilover suspension, which are built-in series with different valve spring types and main valves, offer the freedom to individually adjust the compression and rebound damping with 13 exact clicks (14 characteristic curves) each in the low- and high-speed range. The KW Solid Piston technology -an also be used to cover a large force range when designing the characteristic curves; all the more reason to enable a completely new type of harmonious damping. The KW Variant 5 allows a maximum or individual lowering within the tested Adjustment -ange. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after the years.

This Part Fits:

Year	Make	Model	Submodel
2020-2022	Chevrolet	Corvette	Stingray

Warranty Information

Effective January 1, 2011. Supersedes all previous terms, policies, and agreements

KW automotive North America Inc. warranties its products to the original retail purchaser against defects in workmanship and material for the following terms from the date of purchase:

KW Suspensions

Street Coilovers , Variant 1, Variant 2, Variant 3, Street Comfort – Limited Lifetime Warrantee
Bushings, Bump stops and Ball Joints - 1 Year
Club Sport Coilovers, 2 way Race Coilovers, 3 way Race Coilovers – No warrantee.

Warrantee Conditions & Limitations

This warranty is NOT TRANSFERRABLE, is limited to the United States and its holdings, Canada and Mexico. This warrantee does not apply to:

Any articles not purchased through authorized KW automotive North America Inc. dealers.
Any articles that show signs of abuse, collision or improper installation.
OEM Equipment & Private label items produced by KW automotive (warrantee is carried by the private label company unless otherwise specified).
Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
Any parts that have been sold with "No Warranty" designation on the original invoice.
Any parts that have been modified or altered in any way from its original configuration.
Any parts that have been:
- Installed improperly.
- Used out of its published operating range or outside KW tested force ranges, i.e.
  - Excessively lowered or raised vehicles.
  - Used in conjunction with non Non-KW automotive North America Inc. approved Air Bag kits, sway bars, springs, control arms etc…