Product Overview

AST Suspension Lowering Springs - TESLA MODEL 3 LONG RANGE performance AWD

AST Suspension Lowering Springs for the 2018+ Tesla Model 3 will lower that center of gravity without giving in a lot of the comfort you are used to with the OEM springs. The lowering springs are a direct replacement of the OEM springs and have been developed especially for each specific vehicle. Made out of the best material on the best Wafios coiling machines available.

AST Suspension Lowering Springs are manufactured from a premium high tensile chromium-silicone wire which is handpicked by AST engineers for its quality and metal consistency. Each spring is cold wound and then heat treated to increase hardness and reduce internal stresses present after winding. Each spring is then individually shot peened, phosphate treated and then powder coated to outlast even the life of the vehicle.

FEATURES

Developed and tested to work flawlessly with stock dampers
Progressive design for the best lowering vs performance
Cold coiled
Premium high tensile chromium-silicone wire
Powder coated finish
Lifetime warranty on breaking

INSTALLATION INFORMATION

Assembly

We recommend that our lowering springs be installed by a specialist workshop having the experts and special tools. Prior to assembly, it is absolutely necessary to read the TUV expertise comparing it with the data of the car and the delivered chassis part in order to exclude future assembly and technical problems concerning the TUV.

Brake Power Regulator

If the vehicle is equipped with a load-dependent brake power regulator on the rear axle, we recommend checking this regulator and having it re-adjusted by your specialist workshop.

ABS

Vehicles equipped with an anti-blocking system: the sensors have to be accurately re-adjusted after mounting our lowering springs.

Level Adjustment

Vehicles equipped with level adjustment: requires re-adjustment after mounting our lowering springs.

Wheel Adjustment

After our lowering springs are installed, wheel adjustment values must be checked.

Measuring Method

The lowering indicated by us results from the difference between the standard ride-height (distance between fender and the center of the wheel) and the ride-height after lowering. You should take into consideration that in case of lowering carried out by the factory, the dimensions are reduced by this lowerage.

PRODUCT SPECIFICATIONS

Part Number: ASTLS-19-207
Product: AST Suspension Lowering Springs
Front Lowering Range: 30MM
Rear Lowering Range: 30MM
TUV Certified? No
Production Years: 2018-
Model Years: 2018+
Make: Tesla
Model: Model 3
Chassis:
Model Note:
Fitment Note 1:Â Due to the long wheel base and the lower ground clearance, daily practicality over speed bumps and sharp inclines will be limited with this lowering kit.