HKS Hipermax Max IV SP Coilovers - 2009 - 2015 Nissan GT-R (R35)

(No reviews yet) Write a Review
Was: $4,300.00
Now: $3,354.00
SKU:
AS-IS-80250-AN001
Condition:
Used
Fitment:
2009 - 2015 NISSAN GT-R (R35)
Note:
*ORIGINAL PACKAGING DAMAGED: YES *SCRATCHED OR PAINT MISSING: YES *TOP HAT STUD (1) DAMAGED, CAN BE CHANGED BY PRESSING IT OUT AND REPLACING IT

Product Overview

*ORIGINAL PACKAGING DAMAGED: YES
*SCRATCHED OR PAINT MISSING: YES
*TOP HAT STUD (1) DAMAGED, CAN BE CHANGED BY PRESSING IT OUT AND REPLACING IT

Damping Force (Front): 3000m/sec (Rebound) & 410m/sec (Compression)
Damping Force (Rear): 900m/sec (Rebound) & 360m/sec (Compression)
Front Upper Mount: Spherical Bearing
Lowering (Front): -19mm (From 0 to -91mm)
Lowering (Rear): -17mm (From 0 to -68mm)
Rear Upper Mount: Spherical Bearing
Spring Length (Front): 200mm
Spring Length (Rear): 250mm
Spring Rate (Front): 157N/mm (16kgf/mm)
Spring Rate (Rear): 118N/mm (12kgf/mm)

The sport model to have a comfortable drive even in the winding road.

This "MAX IV SP" is the ultimate sport model for such a high grip radial tire. It will transfer the feelings straight to driver all kinds of information such as tire, road surface condition and traction. It’s a perfect street sport model suspension for people who love to drive fast but still want comfort.

*Single Tube Damper Design*
Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride.

*Dust Boot*
Protect the shaft from the flying stones.

*PNE Coating*
Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment.

*M Shaft (F46 normal type)*
With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience.

*Adopted Pillow Ball Upper Mount*
For more accurate and sharp steering.

*New Design Needle*
Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride.

*Reduction of Unsprung Weight*
In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium. (Not for all vehicles)

*30 Step Damping Force Adjustment*
30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle.

Warranty Information

*ORIGINAL PACKAGING DAMAGED: YES *SCRATCHED OR PAINT MISSING: YES *TOP HAT STUD (1) DAMAGED, CAN BE CHANGED BY PRESSING IT OUT AND REPLACING IT * NO WARRANTY or RETURNS

Reviews

(No reviews yet) Write a Review